Stay Comfy in Southern Maryland With Our Cooling Service Plans!
Thank you for your patience while we update our Service Contracts
Why bother getting an air conditioning service plan? Because nobody is happy when their air conditioning system breaks down. Central air conditioning maintenance is crucial to keep your house cool. And breakdowns almost always happens at the worst time—when the weather is hottest. What’s more, if you’re having problems, you can bet others are too. You might have to wait a long time for service. For that reason, we have a solution: consider a Burch’s cooling service plan
GOLD Cooling Plan: Annual Price: $249.95
The Gold Cooling Plan can be used to cover a central air conditioning system or heat pump. The Gold Cooling Plan Includes:
- Annual precision cooling tune-up
- Priority Service*
- 25% discount on non-covered parts and labor
- Loyalty Credits
Our Gold Cooling Plan includes many things that typically can go wrong with your system. It includes a yearly tune-up and inspection, as well as FREE parts and repair of the following:
- air filters (replaced if provided by customer
- blower drive belt
- blower motor ($125 allowance)
- blower motor drive pulley
- blower shaft
- blower wheel
- condensate pump
- condenser fan blade
- condenser fan motor
- defrost sensor
- electric contactor
- fan center
- fan relay
- high pressure switch
- low pressure switch
- low voltage thermostat (cool only)
- low voltage transformer
- rain shield
- refrigerant – 1st lb per plan year
- running capacitor
- starting capacitor
- time delay control
- thermostat (manual) ($50 allowance for digital)
- thermostat subbase
ENROLL NOW!
Precision Cooling Tune-Up
Your cooling system will be tuned up annually to ensure that it operates at maximum efficiency. We will:
- Lubricate all moving parts: blower motor and condenser fan, (if necessary).
- Check suction line temperature and pressure.
- Check temperature drop between return and supply air.
- Flush condensate drain to protect against overflow.
- Clean outdoor/indoor condenser coil.
- Check blower motor and belt, (if applicable).
- Check blower speed.
- Inspect all controls for proper operation.
- Check voltage and amperage in all motors.
- Check for worn bearings in all motors.
- Inspect operation and condition of compressor contacts.
- Inspect start and run capacitors and relays for bulges, rust and leaks.
- Tighten and inspect all wires and connections.
- Inspect and adjust thermostat/mercury bulb.
- Inform customer of equipment condition. Recommend necessary repairs.
* Cooling service provided between 7:30 a.m. and 4 p.m., Monday through Friday. (Emergency Weekend Service available)