Whether you’ve just had one installed and you want to make the most of it or your older model is starting to act up, we’ve got you covered.
As Burch Oil, we’ve been helping Maryland homeowners with their home comfort solutions since 1928. In that time, we’ve seen the rise in popularity of tankless water heaters – as well as the rise in questions about how to get the most out of them!
In today’s comprehensive blog, we will guide you through the world of tankless water heaters, from understanding how they work to optimizing their performance, addressing common issues, and even knowing when it’s time to consider a replacement.
Before diving into smart usage tips, it’s important to understand how tankless water heaters work.
Unlike traditional water heaters, which store and continuously heat a large tank, tankless water heaters heat water on demand as it flows through the unit.
This instantaneous heating eliminates the need for a storage tank and results in greater energy efficiency.
Tankless water heaters are more energy-efficient because they only heat water when needed. This reduces the amount of standby energy loss associated with traditional water heaters.
However, they also have some limitations and considerations. For instance, tankless systems can have a limited flow rate and may struggle to provide simultaneous hot water to multiple appliances.
To get the most out of your tankless water heater in Waldorf, MD, follow these smart usage tips that ensure optimal performance, energy efficiency and a longer lifespan for your system:
The sizing of your tankless water heater matters. If your unit is too small, it might not be able to meet your hot water needs, leading to frustration and inefficiency.
On the other hand, an oversized system can be unnecessarily expensive and consume more energy. Work with a professional to determine the correct size for your home based on factors like the number of occupants, average water consumption and simultaneous appliance usage.
Proper installation is also crucial for optimal performance. Ensure a qualified professional installs your water heater according to the manufacturer’s specifications and local building codes.
The temperature of your tankless water heater can significantly impact its performance and energy efficiency.
Most manufacturers recommend setting the temperature between 120 to 140 degrees. However, you may need to adjust it based on your preferences and usage habits.
Note that a higher temperature setting will consume more energy and may increase the risk of scalding.
Conversely, lower temperature can reduce energy consumption but might not provide sufficient hot water for your needs.
One limitation of tankless water heaters is that they might struggle to provide hot water to several appliances simultaneously.
To avoid this, try staggering your hot water usage. For example, instead of running the dishwasher and taking a shower all at once, schedule these activities separately.
Like any appliance, tankless water heaters require regular maintenance to function efficiently and prolong their lifespan.
Routine maintenance includes flushing the system to remove mineral buildup, inspecting and cleaning the air and water filters and checking for any leaks or signs of wear. Work with a professional service provider to establish a maintenance schedule tailored to your heater model and needs.
Even with proper usage and maintenance, tankless water heaters can sometimes encounter issues. Here are some common problems and potential solutions:
The first thing you should check is the power source.
If your heater is electric, ensure it’s plugged in, and the circuit breaker hasn’t tripped. If it’s gas-powered, make sure the pilot light is on.
Another possibility is that the water filter is clogged, preventing water from flowing through the system. You should also check the thermostat to see if it’s set to the appropriate temperature.
If your tankless water heater is not producing enough hot water, it could be due to several factors.
One of the most common reasons is that the unit is undersized for your needs. If you’re running several appliances or fixtures at once, you may need a larger unit.
Another reason for insufficient hot water is the flow restriction in the heater due to a clogged filter or mineral buildup. In this case, you may need to flush the unit or replace the filter.
Tankless water heaters don’t have a storage tank, so there’s no risk of tank failure or leaking.
However, these heaters are still prone to mineral buildup, especially if you have hard water. Mineral buildup can clog the pipes and reduce the efficiency of the unit.
To prevent this, flush the unit regularly or install a water softener.
Another common issue with tankless water heaters is temperature fluctuations.
This can happen if the heater is experiencing a flow restriction or if it isn’t sized right for your needs. Flushing the appliance or replacing the filter can help.
If the unit is too small, you may need to upgrade to a larger one.
If you have a gas-powered tankless water heater, ignition failure can be a common issue.
This can happen if the gas supply is interrupted or if the pilot light goes out. To solve this problem, check the gas supply and ensure the pilot light is on.
Always call a professional plumber to inspect your unit.
Many tankless water heaters have built-in error code systems or warning lights to indicate specific issues.
If you encounter error codes or see warning lights on the control panel, consult the manufacturer’s manual or contact a professional for proper diagnosis and repair.
Any signs of water leakage around your tankless water heater should not be ignored. Leaks can occur due to damaged seals, loose connections, or internal issues.
Prompt repair is essential to prevent water damage to your property and ensure the proper functioning of the unit.
Unusual noises coming from your tankless water heater, such as banging, gurgling, or rattling sounds, could indicate a buildup of sediment or mineral deposits, a loose component, or other mechanical issues.
These should be addressed by a professional to prevent further damage.
Regular tankless water heater service is crucial to keep your tankless water heater running smoothly.
A technician can identify and address issues, such as reduced water flow, fluctuating temperatures or unusual noises before they escalate into more significant problems.
While tankless water heaters generally have a longer lifespan than traditional water heaters, there may come a time when replacement is necessary.
Factors to consider when deciding whether to replace your unit include its age, any recurring issues and the cost of ongoing repairs versus investing in a new, more efficient model.
offers tankless water heater maintenance and support in Hollywood, MD. With years of experience and a commitment to customer satisfaction, you can trust our team to provide unparalleled care for your tankless water heating system.
Let us know how we can help you get the most out of your tankless water heater unit. Call (301) 373-2131 or complete our contact form today to schedule a consultation.
In Huntingtown, Maryland, the seasons bring their own unique challenges to homeowners. With summers that…
When it comes to emergency generators, it’s always best to make sure you’ve got yours…
One of the best parts of living in Leonardtown, MD is how brightly each season…
If you’ve been thinking about setting up automatic fuel delivery, you likely already know its…
Nestled in Charles County, Maryland, La Plata is a community of just over 10,000 residents…
Quick question for the Southern Maryland homeowners among us: Do you know when the earliest…